1.What is Sunite's position in the AAC industry?
National high-tech enterprise with 25 years in AAC equipment. Over 30% domestic market share, 600+ lines in 30+ countries. Holds special equipment license, ISO and CE certifications.
2.How is the company's research and development capability?
Provincial R&D center, with 9 inventions and over 100 utility model patents. The production capacity of 7.2 meters per meter is 20% higher than that of 6 meters per meter and 50% higher than that of 4.8 meters per meter. Three demonstration lines are operating stably.
3.How adaptable are the raw materials?
Can process various raw materials such as cement, silica sand, fly ash, etc., with a maximum industrial waste content of 80%
4.What are the options for capacity allocation?
Annual output of 50000 to 1 million cubic meters modular production line, mainstream 200000 cubic meters with dual 6m ³ pouring machine, pouring cycle of 1.7 minutes per mold, cutting accuracy of ± 1mm.
5.Is the energy consumption index better than industry standards?
3-stage heat recovery cuts steam use by 33%. Power consumption 30% lower than traditional (≤9kWh/m³), exceeding DB33/866-2013.
6.How long is the installation and commissioning cycle?
Modular design shortens installation cycle by 30%. The Indonesia project was put into production in 4 months, 2 months shorter than the industry average.
7.What is the after - sales service response speed?
48 - hour global response, with parts warehouses in Vietnam and Nigeria. Provides lifelong technical support and regular free inspections.
8.Can schemes be customized according to site conditions?
Provides U - type, L - type and other layouts, with a minimum area of 15 mu. The Anhui old factory renovation project increased production capacity by 40%.
9.Can high - end plate products be produced?
The 7.2 - meter line produces B05 grade plates with flexural strength of 4.0MPa, equipped with non - supporting packaging system, with transportation damage rate <1%.